Toxic Diesel - Discounts on Powerstroke, Cummins, and Duramax parts!

You are here: Home > Gauge Accessories

Sort By:

Page of 1

12' Long Nylon Tubing Kit

1/8" NPT Temperature Sender

Universal 12' Long Nylon Tubing Kit

Product price is not filled in. This product cannot be purchased.

List Price: $19.80

Product price is not filled in. This product cannot be purchased.

List Price: $14.17

Product price is not filled in. This product cannot be purchased.

List Price: $27.81

DiPricol
12' Long Nylon boost Tubing Kit

1/8" NPT Temperature Sender, 12-24 Volts, 100-280° F Scale

DiPricol
Universal 12' Long Nylon Tubing Kit

Universal 40' Long Nylon Tubing Kit

Universal 8' Long Nylon Tubing Kit

1/4" Thermocouple Adapter

Product price is not filled in. This product cannot be purchased.

List Price: $34.85

Product price is not filled in. This product cannot be purchased.

List Price: $23.58

Our Price: $4.84

DiPricol
Universal 40' Long Nylon Tubing Kit

DiPricol
Universal 8' Long Nylon Tubing Kit

1/4" NPT adapter for 1/4" probe diameter thermocouple

Thermocouple Adapter

8' Long Nylon Tubing Kit

7' Thermocouple Lead Wire

Our Price: $5.81

List Price: $19.70
Our Price: $17.34
You save $2.36!

Our Price: $24.38

1/4" NPT adapter for 1/8" probe diameter thermocouple

DiPricol
8' Long Nylon Tubing Kit
This is the most popular size to use with the Di Pricol boost gauge on all pickup models. can also be used with air pressure gauges.

Extension wires are used to connect the thermocouple to the pyrometer. Danin offer various lengths of these extensions.

8' Thermocouple Lead Wire

12' Thermocouple Lead Wire

14' Thermocouple Lead Wire

List Price: $29.74
Our Price: $29.74

List Price: $30.01
Our Price: $30.01

List Price: $31.33
Our Price: $31.33

Thermocouple Extension Wire Assembly

30' Thermocouple Lead Wire

45' Thermocouple Lead Wire

50' Thermocouple Lead Wire

List Price: $52.18
Our Price: $52.18

List Price: $63.54
Our Price: $63.54

List Price: $71.72
Our Price: $71.72

Thermocouple Extension Wire Assembly

Thermocouple Extension Wire Assembly

Extension wires are used to connect the thermocouple to the pyrometer. Danin offer various lengths of these extensions.

Extension wires have a 2-PIN AMP connector at one end. This end mates with the AMP connector on the Danin/Pricol pyrometer. The other end of the extension wire connects to the thermocouple.High quality extension wires are important for measurement accuracy. Danin extension wires offer very low resistance as high resistant values produce incorrect temperature readings.

After the thermocouple is properly installed in the exhaust manifold and is secured against vibration, it is ready for the extension wire connection. We recommend that you drill a 1/4" hole in the firewall, install the rubber grommets and thread (route) the extension wire into the engine compartment. Make sure the AMP connector remains inside the cab. Connect the thermocouple positive (yellow) wire and negative (red) wire to the correstponding color on the extension wire. After the connection is secured, slide the black shrink tube over the connections and shrink it using a heat gun.

You will need the following tools to complete this assembly:
1. Wrenches of 5/16", 9/16" and 5/8"
2. A Phillips Head Screwdriver
3. A Heat Gun

Thermocouple Extension Wire Assembly